Brick Paver Installation & Edging



Staging of product

A lot of paver tasks will vary depending upon access, website conditions, job size and of course, the weather condition. These situations can have a general impact on your job from a timing stand point. Careful factor to consider should be required to determine the time to begin the paver installation. Always attempt to prevent any traffic or lessen on the ready locations.

The foreman or job manager must constantly have the materials (sand/ pavers) dispersed around the project website for effective and easy setups. Paver pallets/bundles should be placed in a way not to disrupt the paver installation. The proper pallet/bundle placement can make the actual task installation easier and quicker by lowering the overall labor of dealing with the product.

Brick paver patterns

Pavers can be placed in various patterns depending upon their shape. Each paver shape will generally have a number of various hatch patterns that are offered by the maker.

The laying pattern and shape of the paver is very vital to the efficiency of the application. Professionals have to take into consideration the traffic weight loads on their paver jobs. 90 or 45 degree herringbone patterns are advised in all street and driveway applications, as these patterns will provide the maximum load assistance needed and will resist sneaking from the turning of tires and braking or beginning of car traffic. In the majority of applications worldwide, it has actually been revealed that pavers laid in a herringbone pattern have performed adequately.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be used in industrial or commercial applications must be 80 mm (3 - 1/8 in) in density.

Reference/starting point for brick paver installation

There are a number of conditions that determine the beginning point of a paver task.

When starting to set up pavers it is best to snap a true straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface area of the bed linen sand at the finished elevation of the pavers This will assist as a guide for maintaining straight joint lines and will also enable the installer to make changes in the positioning of the pavers.

Buildings and concrete curbing are normally not straight and need to not be utilized for establishing straight joint lines. The use of string lines is important to identify the real straightness of the edge. As the paver installation advances, the string lines will assist minimize the need for small trim pieces.

These will preserve a minimum joint width and enable the bed linen and jointing sand to get in between each paver. Pavers with spacer bars are generally not laid in snug against each other given that a string line will supply constant joint spacing.

Installation of brick pavers.

One of the most widely used techniques for the installation of pavers is hand installation of each paver. It is best to set up a single row of pavers along one of the real straight lines that you have actually pulled or above the bed linen sand. The finest technique is to put a paver versus another one and let it slide down into the bedding sand.

When installing pavers on a steep grade, they ought to be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

The best way for installing pavers on large projects is South Florida Pavers to install them mechanically. There are a couple items a contractor need to think about prior to installing pavers mechanically:

1.) Mechanical installers are only capable of setting up pavers in particular patterns.

2.) The professional must make certain that the maker can production and bundling pavers in the preferred pattern on the pallets for easy mechanical installation.

3.) Contractors might come across a color mixing circumstance coming off the bundles of pavers Poor color blending might lead to a patchy looking installation. Many manufacturers are consistent with color mixing on each package of pavers, however it is the professional's obligation to ensure proper mixing in the field.

Cutting treatments for brick pavers.

Contractors normally have 2 ways of cutting pavers. When cutting pavers damp, it will help minimize dust and will lengthen the diamond blades life. The operator of the brick saw ought to always cut the pavers away from the surface area of the paver field when cutting wet, due to the reality that the pavers will produce a slurry that will stain the paver surface.

The brick saw operator must always use the appropriate protection that is required for running a saw, such as eye, ear, breathing and hand security ).

Edging types

Edge restraints play a major role in the general success of an interlocking pavement installation Edging restraints eliminate lateral motion of the pavers and hold the pavers firmly together. Especially at the external perimeter of the paver application, without an edging restraint, your task is guaranteed to stop working gradually.

There are several various edging restraints from which specialists can select. Typically produced edge restraints are the most commonly used by contractors. Produced edging restraints can range from, plastic edging, steel and aluminum, lumbers or precast concrete and stone. An edging type that is used mostly in industrial and commercial applications is poured-in-place concrete curbs. This edging restraint is normally installed by other contractors.

Edging installation.

This might result in the migration of the bedding sand and eventual lateral motion of the pavers. If there is a possibility of losing bedding sand between the pavers and the edge restraint, then geo textile material is recommended. When a space in between the pavers and the edging exceeds 3/8" (10mm), then the area needs to be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The whole area that is to be compressed need to be swept clean of any foreign items and particles that can cause scuffing or scratching on the surface of the pavers.

It is necessary to have a compactor that can exert between 3000lbs. And 5000 pounds. Of centrifugal compaction force. In addition, it is important that the first compaction happens prior to any jointing sand has been applied to the pavers. If jointing sand is applied to the pavers prior to compaction happens, this can cause a bridging problem and will not permit the joints to be entirely filled with jointing sand. This can also prevent the pavers from being properly set into the bedding sand.

When condensing the pavers, it is advised that you make at least 2 passes in various directions across the pavers. This will permit the pavers to be appropriately set in the bedding sand and will force the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very crucial to the last efficiency of the pavers. Failure to do correct compaction can result in deformations and pavement failure in time.


Paver pallets/bundles ought to be put in a way not to interfere with the paver installation. One of the most extensively used methods for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to always cut the pavers away from the surface of the paver field when cutting wet, due to the truth that the pavers will produce a slurry that will stain the paver surface area. Edging restraints remove lateral motion of the pavers and hold the pavers tightly together. When a gap between the pavers and the edging exceeds 3/8" (10mm), then the space must be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *